DeVilbiss launches new SLG-610 “Starting Line” 1.3mm Spraygun

The new DeVilbiss SLG-610 “Starting Line” Spray gun 1.3mm
This new model is a budget priced spray gun with conventional atomisation targeted at small jobbing car refinish painters where low output portable compressors are frequently in use.

Features

• Suitable for most automotive refinish general single layer materials
• Lightweight but strong, plated, cast aluminium spray gun body construction
• Comfort ergonomical handle
• Smooth trigger action for ease of operator control when feathering or bleeding
• Easy to adjust air inlet pressure, spray pattern shape (full fan to round) and fluid controls
• The air cap only consumes 136 L/min (4.8 cfm) so a small portable 1hp / 5 cfm air compressor is sufficient to operate the spraygun
• SLG-610 sprayguns are supplied as ready to use "Refinisher Kits" complete with a 550ml cup, filter, cleaning brush & universal spanner
  

Specification

The SLG-610 has a standard 1/4" air inlet connection thread and has a recommended working pressure of 2.5 bar (35psi). The max inlet pressure is 4 bar.

Comes as a 1.3mm Setup.

Devilbiss GFG PRO conventional spray gun

GFG Spray Guns go Pro.....fessional
Following the successful launch of the GTi-Pro last
summer we are now pleased to announce the
introduction of our all new GFG Pro conventional
spray gun.
Taking on board the advances made with the GTi
we have now transferred those same advantages
across to the GFG Pro.
Two advanced technology C1 & C2
conventional air caps have been developed
and specifically designed to handle all types of
material technologies.
The C1 Air Cap has been developed to replace the
existing 186+. With a greatly improved spray
performance it’s ideally suited for all base and
clearcoat applications, in conjunction with the
new 14 fluid tip.
The C2 Air Cap has been developed to replace
the existing 30+. Also having a greatly
improved spray performance it has a faster
application rate than the C1 making it ideal for
all primer or high viscosity materials, in
conjunction with the new 18 Fluid Tip.
• First class atomisation and material
distribution.
• Utilities new design air valve for smooth trigger control.
• New ergonomic gun body with improved ‘fit and feel’.
• Drop forged body with tough anodised finish for protection.

Satajet 100 B Spray Gun Product News

SATAjet 100 B - the New Generation of Primer and Filler Guns

New Spray Gun Series

„Quality starts with the foundation“. With this motto, SATA is now launching the SATAjet 100 series, the new spray gun range for primer materials which will replace the corresponding SATA KLC models with the nozzle sizes 1.6 – 1.7 – 1.8 – 1.9 – 2.0 – 2.1.
The spray gun series SATAjet 100 B consists of three different product categories, each one of them specially developed for their specific area of primer material application, yet highly flexible and universally applicable: From spot repair areas to large surfaces; with inlet pressures ranging from 0.5 to 1.5 bar.
Their fine atomisation and their large, yet compact spray pattern provide an even material application with little need for rework, i.e. a minimum of sanding time and consequently a much reduced consumption of sanding paper. Due to the atomisation technology with minimised overspray the masking effort during preparation is reduced considerably, thus offering additional potential for cost savings.

Two Ways - One Goal
According to the work method, the substrate and the material, the painter may optionally choose from different systems and a nozzle range which has been adapted to the various primer materials available.
Dubbed the „Super Speed“, the SATAjet 100 B F RP works with optimised high-pressure technology (RP = Reduced Pressure). The „Super Saver“, the SATAjet 100 B F HVLP is based on the widely known HVLP low-pressure system. The letter combination „B F” integrated into the model specification stands for gravity-flow cup gun and primer material application (Becher = German for cup; Füller = German for primer). The new series is completed by a special gun for polyester primers and spray putties which have to be sprayed with high film build, the SATAjet 100 B P (P = polyester).
All model versions achieve high transfer-efficiency rates, often significantly exceeding 65%, which allows working extremely efficiently and eco-friendly. Any waterborne and solvent-based material available on the market can be sprayed without restrictions with this new spray gun range.


Completely Equipped

After many field application tests end-users and the application laboratories of the paint in-dustry are convinced of the practicality of the new spray guns series:
• Enhanced atomisation and spray patterns for primer materials
• Ergonomically optimised spray gun body in state-of-the-art design with small di-mensions and low weight for fatigue-free working
• Smoothly polished gun surface for easy and quick cleaning including material passages
• Now with material-flow control with counter nut and enhanced thread, as with the top coat spray guns
• Air micrometer with graduations to adjust atomisation air
• Self-adjusting seals in air and material area
• Comfortable trigger with low trigger-pull resistance and integrated paint needle cover, minimising cleaning effort and increasing the life time of the needle packing
• CCS-Clip (Colour Code System) to mark each spray gun individually
• Single-handed round/flat control to adjust the spray pattern to the object which is to be painted
• QCC quick cup connector for quick cup changes and fast cleaning as well as for the use of the RPS disposable cup system without need for an additional adaptor.

Spray Gun / Automotive Links

Sprayguns
DeVilbiss Spray guns
Iwata Spray guns
Sata Spray guns
Daltalyo Spray guns
Kestrel Spray guns

Airbrush
Iwata Airbrushes
DeVilbiss Airbrushes

Spray Gun and Parts
DeVilbiss GTI PRO Gravity Spraygun H1B GTIPROH1B

3M Automotive Finishing & Polish
3M Polishing

About Sprayguns Direct

Sprayguns Direct was first conceived in 2002 as we recognised the advantage of specialising in this complicated area of the market. The emphasis on the website simplifies identification and eliminates communication breakdown. Furthermore, the concentration on spray equipment gives bulk purchase and bulk stocking advantages. With carrier services as they are in the modern market we realised that we could service most customers on a national level quicker than their local distributor and without extra cost.

The company is a division of Morleys of Derby, which was established in 1966 and is run by the founder, David Clarke with the assistance of his three sons and a large support staff.

Within the company there are three ex sprayers, two of whom have been trained by DeVilbiss and Sata. These factors give the assurance of reliable back up to Sprayguns Direct.

New Spray Gun - DeVilbiss JGA Pro Pressure Spraygun C1

The NEW DeVilbiss JGA Pro Pressure Spray gun C1

Trade Price - £240.00 (Sprayguns Direct Price - £225.60 inc VAT) - Click here to BUY
DeVilbiss JGA Pro Pressure spray gun (C1) New from Devilbiss automotive refinishing.

Devilbiss JGA spray gun features:

• Totally redesigned, DeVilbiss JGA drop forged aluminium spray gun body.
• New, restyled ergonomic spray gun body with improved fit, feel, comfort and controls.
• Suitable for use with a suction cup or pumps, tanks or remote feed cups.
• Three conventional air cap choices to suit most car and CV refinish paints and materials.
• A range of four pressure and two suction fluid nozzle sizes varying viscosities and control preferences.
• Utilises new air valve design for ultra smooth triggering and control.
• renowned DeVilbiss atomisation quality and even paint distribution.
• Faster, easier maintenance from user-friendly fittings and adjustments
• Rugged drop forged body with red anodised finish for protection